Kramer 1:2 Microphone to Line Distribution Amplifier
The Kramer 106 takes one balanced mono microphone and splits it into two balanced line-level feeds, so a single lectern or panel mic can feed a recorder and a room system at the same time without a mixer in the chain. A front pushbutton sets the input for a dynamic or condenser mic, and 48V phantom power is on board for condensers. Gain runs up to 68dB, with a trimmer on each line output plus a master trimmer.
Everything lands on 3-pin terminal blocks, which suits permanent installs behind a rack or under a table. The box is a Kramer TOOLS compact unit, 4.72 x 2.81 x 0.96 inches, and three of them fit side by side in 1U with Kramer's rack adapter. It runs on 12V DC at 220mA; the power supply and a mounting bracket come in the box.
| Model | 106 |
|---|---|
| Signal to noise | 81dB |
| THD | 0.18% |
| Power consumption | 12V DC, 220mA |
| Weight | 0.3 kg (0.66lbs.) approx. |
| Inputs | 1 balanced mono microphone on a 3–pin terminal block connector |
| Outputs | 2 balanced mono line outputs on 3-pin terminal block connectors |
| Mic Type | Condenser or dynamic, selectable |
| 48V DC | |
| Gain | Up to 68dB |
| Max. Output Level | 27Vpp (22dBu) |
| Bandwidth | >40kHz |
| Dimensions | 12.00 x 7.15 x 2.44 cm (4.72 x 2.81 x 0.96 in) |
| Included | Power supply, mounting bracket |
