JBL Control 47HC High Ceiling Loudspeaker
The Control 47HC is a high ceiling loudspeaker, from the Control Contractor 400 Series. Transducers are LF Driver: 165 mm (6.5 in) HF Driver: 25 mm (1 in). Nominal coverage is 75 degrees conical, constant directivity. Frequency range is 55 Hz - 17 kHz. JBL rates it at IEC System Long-Term Ratings (low-Z direct): 150 Watts Continuous Program Power 75 Watts Continuous Pink Noise (300W peak), 100 hrs. Maximum SPL at 1 m is 112 dB (low-impedance, 118 dB peak) 111 dB (top 70V/100V tap).
Transformer taps are 60 W, 30 W, 15 W, (& 7.5 W @ 70 V), plus transformer bypass. Connections are Two removeable locking 2-pin connectors with screwdown terminals. In the box: C-rings, tile rails, paint shield, cutout template, Grille.
| Type | High Ceiling Loudspeaker |
|---|---|
| Frequency Range | 55 Hz - 17 kHz |
| Power Rating | IEC System Long-Term Ratings (low-Z direct): 150 Watts Continuous Program Power 75 Watts Continuous Pink Noise (300W peak), 100 hrs |
| Sensitivity | 93 dB (1kHz - 16 kHz) |
| Transformer Taps | 60 W, 30 W, 15 W, (& 7.5 W @ 70 V), plus transformer bypass |
| Coverage Angle | 75 degrees conical, constant directivity |
| Impedance | 8 ohms (in bypass mode) |
| Drivers | LF Driver: 165 mm (6.5 in) HF Driver: 25 mm (1 in) |
| Input Connectors | Two removeable locking 2-pin connectors with screwdown terminals. |









