JBL logo
Shop all JBL

JBL Control 40CS/T High-Impact In-Ceiling Subwoofer

The Control 40CS/T is a high-impact in-ceiling subwoofer, from the Control Contractor 400 Series. Transducers are 200 mm (8 in) subwoofer. Nominal coverage is Omnidirectional. Frequency range is 32 Hz - 300 Hz. JBL rates it at IEC System Long-Term Ratings (low-Z direct): 200 Watts Continuous Program Power 100 Watts Continuous Pink Noise(400W peak), 100 hr. Maximum SPL at 1 m is 109 dB (low-impedance, 115 dB peak, center of ceiling) 115 dB (low-impedance, 121 dB peak near corner) 108 dB (70V/100V, center of ceiling) 114 dB (70V/100V near corner).

Transformer taps are 80 W 40 W, 20 W, (& 10 W @ 70V), plus transformer bypass. Connections are 6 removeable locking 2-pin connectors with screwdown terminals. In the box: C-rings, tile rails, paint shield, cutout template, grille.

TypeHigh-Impact In-Ceiling Subwoofer
Frequency Range32 Hz - 300 Hz
Power RatingIEC System Long-Term Ratings (low-Z direct): 200 Watts Continuous Program Power 100 Watts Continuous Pink Noise(400W peak), 100 hr
Sensitivity95 dB (near corner), 89 dB (center of ceiling)
Transformer Taps80W, 40W, 20W (& 10W at 70V only)
Impedance8 ohms (in bypass mode)
Drivers200 mm (8 in) subwoofer
TerminationScrew-down removable locking clip-in connector
Satellite OutputsConnectors for 2 or 4 Control 42C satellite speakers
JBL Control Contractor Series Commercial Installed Loudspeakers | Quick Look