Ikan Lightweight Motorized PTZ Pedestal, 33 lb Payload
The Ikan M-PTZ-PEDESTAL-33 is a motorized column for PTZ camera rigs up to 33 lbs, mounted on a three-leg wheeled dolly. It is the lighter and less expensive sibling of Ikan's 66 lb M-PTZ-PEDESTAL, sized for a PTZ camera on its own or a compact prompter setup. A leveling head with a locking knob keeps the camera flat so pan and tilt stay even, and the top-mount quick-release plate threads into the bottom of the camera.
The wired controller clamps to the lower column and raises or lowers the camera with up and down buttons, to a top height of 82 inches. Three presets bring back saved heights, and an LED readout shows where the column is. Each caster has a cable guard so the dolly rolls over cords, the casters lock once you are in position, and the legs fold for transport. In the box: motorized column, leveling ball, column controller, controller clamp, dolly with cable guards, and power adapter/control box.
- Height Range41 to 82 in
- Max. Payload33 lbs
- Height Presets3 programmable
- Camera PlateTop-mount quick-release
| Model | M-PTZ-PEDESTAL-33 |
|---|---|
| Max. Payload | 33 lbs |
| Height Range | 41 to 82 in |
| Height Presets | 3 programmable |
| Controller | Wired, up/down operation, clamps to column |
| Head | Leveling head with locking knob |
| Camera Plate | Top-mount quick-release |
| Base | Wheeled dolly with cable guards, foldable legs |
| Included | 1 x Motorized Column, 1 x Leveling Ball, 1 x Column Controller, 1 x Controller Clamp, 1 x Dolly w/ Cable Guards, 1 x Power Adapter/Control Box |









