Hollyland Walkie-Talkie Converter-Box

The Walkie-Talkie Converter-Box bridges a standard two-way radio into a Hollyland wireless intercom system, so security, parking, or runner teams on handheld radios can talk directly with a crew on Solidcom M1, Solidcom C1, Solidcom C1 Pro, or Syscom 1000T headsets without relaying messages by hand. A 5-pin K-LEMO connector handles the walkie-talkie side and a balanced 3-pin XLR I/O carries audio to and from the intercom system, with both PTT and VOX operating modes so it fits either a push-to-talk radio workflow or hands-free voice-activated switching.

Onboard audio electronics keep the connection clean: a 100 Hz to 20 kHz frequency response, 4 dB of gain, and under 1% distortion at up to 18 dBu input keep radio chatter intelligible on the intercom side. It runs on a 12V DC supply for stable, consistent operation, and ships with the power adapter, user manual, and warranty card needed to get it running out of the box.

Function	Two-way radio to wireless intercom system bridge
Radio Connector	5-pin K-LEMO
Intercom Connector	Balanced 3-pin XLR I/O
Operating Modes	PTT and VOX
Frequency Response	100 Hz - 20 kHz
Audio Gain	4 dB, max input 18 dBu, distortion <1%, S/N >55 dB
Power	12V DC (adapter included)
Compatibility	Solidcom M1, Solidcom C1, Solidcom C1 Pro, Syscom 1000T, and other 4W devices