Hollyland logo
Shop all Hollyland

Hollyland Solidcom C1 Pro Wireless Stereo Remote Headset

This remote headset adds a team member to an existing Solidcom C1 Pro system, whether it's running direct headset-to-headset or expanded with a HUB Base. It carries the same dual-mic Environmental Noise Cancellation as the rest of the C1 Pro line, isolating a speaker's voice from crowd noise, engine noise, or stage wash before it reaches the rest of the team, over a DECT 6.0 link on the 1.9 GHz band with under 35 ms of latency.

Pick the ear configuration to match the room. The single-ear version keeps one ear on the room while the other stays on the call, with a mic boom that rotates for either-ear wear; the double-ear version closes off both ears for a loud stage or a busy floor. The 700 mAh battery runs about 10 hours per charge, and the headset ships with a spare battery plus a mic cushion and earmuffs so it's ready to hand a new crew member the moment they arrive on set.

RoleAdd-on remote headset for the Solidcom C1 Pro system (direct or HUB-based)
TechnologyDECT 6.0 full duplex, 1.9 GHz
Noise CancellationDual-mic Environmental Noise Cancellation (ENC)
LatencyLess than 35 ms
Audio Bandwidth150 Hz - 7 kHz with acoustic echo cancellation
DesignSingle-ear (HL-C1PRO-SH02) or double-ear (HL-C1PRO-DH02); rotating mic boom for either-ear wear
MutingMute/PTT button or rotating boom
Battery700 mAh Li-ion, approximately 10 hours per charge
IncludedSpare battery, mic cushion, earmuffs
Can the Solidcom C1 Pro and Solidcom C1 work together? Absolutely yes!