Hollyland Pyro 7 7-Inch Wireless Transceiver Monitor

The Pyro 7 collapses the monitor and the wireless link into one box: the same unit works as a transmitter at the camera or as a receiver at the director's chair, so a two-unit kit covers both ends without separate radios hanging off each.

The panel is a 7 inch touchscreen at 1920 x 1200 and 323 PPI with 1500 nits of brightness, which is the figure that decides whether it is readable outdoors. Input and output are HDMI 1.4b and 3G-SDI on both sides, with a 3.5mm headphone jack for audio and an SD card slot alongside USB-C for firmware. The radio reaches 400m (1,300ft) line of sight at 0.05 seconds of latency across 2.4GHz and 5GHz with auto dual-band hopping, transmitting up to 4K30, and streams over UVC and RTMP. It runs on 10 to 18V DC at 2.5A and draws under 22W.