Gefen EXT-3G-HD-C 3G-SDI to HDMI Converter
The EXT-3G-HD-C takes a 3G-SDI (Level A or B), single-link HD-SDI or SD-SDI feed on a BNC input and outputs it as HDMI at up to 1080p, with up to 8 channels of LPCM audio carried through. It puts an SDI camera, router output or deck on an HDMI monitor or projector. Output is HDMI (YCbCr 4:4:4) or DVI (RGB 4:4:4), and five DIP switches handle configuration.
The box measures 2.9 x 1.2 x 2.3 inches and accepts 6 to 24 V DC through a locking 3-pin connector, so it can run from the included 12 V supply in a rack or from DC power on a cart. It has a 1/4-20 thread and a detachable surface bracket, and the mini-USB port takes firmware updates through Gefen Syner-G software.
- Dimensions2.9" x 1.2" x 2.3" (74mm x 30mm x 59mm), 0.3 lbs
- Video input(1) SDI BNC-type, female; 3G-SDI Levels A and B
- Video output(1) HDMI Type A 19-pin, female, locking
- ResolutionsInput up to 1080p60, output up to 1080p Full HD
- Power12V DC nominal (6V to 24V DC operating range), 2W maximum
| Part number | EXT-3G-HD-C |
|---|---|
| Video input | (1) BNC-type, female; 3G-SDI Levels A and B, single-link HD-SDI, SD-SDI |
| Video output | (1) Type A 19-pin, female, locking; HDMI (YCbCr 4:4:4) or DVI (RGB 4:4:4) |
| Resolutions | Input up to 1080p60, output up to 1080p Full HD; up to color |
| Audio | Up to LPCM 7.1, 8 channels |
| Power | 12V DC nominal (6V to 24V DC operating range), 2W maximum, 3-pin locking |
| Dimensions | 2.9" x 1.2" x 2.3" (74mm x 30mm x 59mm), 0.3 lbs (0.15 kg) |
| Mounting | 1/4-20 thread and detachable surface bracket |
| In the box | Converter, surface mounting bracket, 12V power supply, quick-start guide |









