Feelworld LIVEPRO L1 PLUS Multi-Camera Video Switcher
The LIVEPRO L1 PLUS is the small end of the Feelworld switcher line, built around four HDMI 2.0 inputs that accept sources up to 2160p60 and a 2-inch touchscreen for setup and switching. It is the box for a two-camera podcast, a classroom capture, or a house of worship that needs a cut and a stream without a rack.
Program feeds out over HDMI 1.3 and over USB 3.0 as a UVC device, so a laptop sees it as a webcam in any streaming application, with H.265 and H.264 streaming formats supported. VISCA PTZ control runs from the switcher, so remote heads pan and tilt from the same surface that cuts them, and an RJ45 LAN port over CAT6 handles network control. Two 3.5mm audio inputs and one output cover the mix.
| Type | Multi-camera video switcher with PTZ control |
|---|---|
| Screen | 2 in touchscreen, LED backlight |
| Inputs | 4 x HDMI 2.0, up to 3840 x 2160 and 4096 x 2160 at 60 Hz |
| Outputs | 1 x HDMI 1.3, 1 x USB 3.0 Type-A |
| PTZ Control | VISCA protocol |
| Network | 1 x RJ45 LAN (CAT6) |
| Audio | 2 x 3.5mm in, 1 x 3.5mm out |
| Video Format | HDMI 2.0 with HDCP 2.2; H.265 and H.264 streaming |







