Shop All Fluid Audio
Fluid Audio FC10S 10-Inch Studio Subwoofer
The FC10S is a 10-inch powered subwoofer with a composite paper cone and 200 W Class D, reaching 20 Hz to 200 Hz and 107 dB max SPL (108 dB on the Punchy setting). The low-pass sweeps 50-200 Hz, phase is variable from 0 to 180 degrees, and an 80 Hz high-pass feeds the satellites.
XLR, 1/4-inch and RCA inputs, XLR and 1/4-inch outputs, a ground lift switch and an included bypass footswitch for checking a mix with and without the sub. The cabinet is vinyl-laminated MDF, 15.25 x 12.5 x 15.5 in and 28.2 lbs.
- Size15.25" x 12.5" x 15.5", 387 x 317 x 394mm
- Power Output (Continuous)200 watts
- Mains Voltage InputFactory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
- Frequency responseFrequency response: 20-200Hz
- Weight28.2 lbs / 12.8 kg
| Part number | FA-FC10S-US |
|---|---|
| Woofer | 10-inch composite paper cone with high temperature voice coil and damped rubber surround |
| Amplifier type | Class D |
| Power Output (Continuous) | 200 watts |
| Frequency response | Frequency response: 20-200Hz |
| Max SPL | Max SPL 107dB Flat / 108dB Punchy setting |
| I/O Rear panel | balanced and 1/4" balanced/unbalanced inputs; RCA inputs; XLR balanced and 1/4" balanced/unbalanced outputs; Subwoofer bypass pedal input (Included) |
| Rear panel adjustments | Input gain; Variable phase; Ground lift switch; Punchy Bass / Flat |
| Variable lowpass filter control | 50Hz-200Hz |
| Variable Phase control | 0 - 180° |
| Power Saving | Amplifier standby function to conserve energy |
| Protection | RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse |
| Mains Voltage Input | Factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz |
| Size | 15.25" x 12.5" x 15.5", 387 x 317 x 394mm |
| Weight | 28.2 lbs / 12.8 kg |
| Cabinet | Vinyl-laminated, high acoustic efficient MDF |
| Other | 80 Hz highpass filter(with foot switch) for satellite connections; Included footswitch allows you to turn FC10S on and off for auditioning with bass and without |
XLRThe three-pin balanced audio connector used on professional microphones and mixers.






