Datavideo logo
Shop all Datavideo

Datavideo ITC-300 Digital Intercom System

The ITC-300 is a wired digital intercom base station taking up to eight belt packs on direct connections, so a director can talk to all positions at once or to one at a time. Belt packs run up to 100m from the base, which covers a studio floor or a modest outside broadcast.

It is a standard 19 inch 1U chassis, so it racks alongside the switcher, and it integrates with Datavideo switchers including the SE-500HD and SE series through two 15-pin D-Sub tally connectors for tally A and tally B. The operator position takes a 3-pin XLR or 1/4 inch microphone, switchable between condenser and dynamic, plus a 3.5mm headset jack and a 1/4 inch headphone socket, with a 3W built-in speaker that mutes when a headset is plugged in. Audio response is 300 Hz to 7 KHz within 3 dB at better than 70 dB signal to noise.

Channels8 wired belt packs, direct connection
Operating RangeUp to 100m between base station and belt pack
Tally2 x 15-pin D-Sub (tally A and tally B)
Microphone Input3-pin XLR and 1/4 inch, switchable condenser or dynamic
Headset / Headphone3.5mm stereo headset jack, 1/4 inch stereo headphone socket
Built-in Speaker3W, mutes when a headset is connected
Frequency Response300 Hz to 7 KHz, within +/-3 dB
Distortion / NoiseTHD under 0.1% at 1 KHz, S/N better than 70 dB
Chassis19 inch 1U rack
Top 5 Features of the Datavideo ITC-300 Digital Intercom System
Datavideo ITC-300 Digital Intercom System Introduction
ITC-300 Digital Intercom System 360 Product Video