dBTechnologies VIO C12 2-Way Active Cluster Loudspeaker
The VIO C12 is the 12 in member of dBTechnologies' VIO C cluster series: a 2-way active box with a 12 in neodymium woofer on a 3.5 in voice coil and a 1.4 in neodymium compression driver on a 3 in coil. Its 22.5 degree horizontal pattern is built for cluster arrays, and a 1600 W RMS Class-D Digipro G4 amplifier drives it to a maximum SPL of 139 dB with a -6 dB response of 55 Hz to 18 kHz.
A 32-bit DSP runs FIR linear phase filters and dual active peak, RMS and thermal limiting, and an OLED panel handles setup. Audio comes in on XLR with an XLR link out, mains on powerCON TRUE1 in and out, and the RDNet card (Dante optional) adds remote control. The plywood cabinet has a polyurea finish, corner quick-link rigging, an inclinometer and a rain cover, and weighs 31.8 kg (70.1 lbs). The power cable is not included.
- Dimensions (W x H x D)379 x 787 x 495 mm (14.92 x 30.98 x 19.48 in)
- Frequency Response [-6 dB]55 - 18,000 Hz
- Weight31.8 kg (70.1 lbs)
- Speaker Type2-Way Active Cluster Loudspeaker
- Max SPL139 dB
| Speaker Type | 2-Way Active Cluster Loudspeaker |
|---|---|
| Frequency Response [-6 dB] | 55 - 18,000 Hz |
| Max SPL | 139 dB |
| HF | 1x 1.4 in, 3 in v.c. - Neodymium |
| LF | 1x 12 in, 3.5 in v.c. - Neodymium |
| Amplifier | 1600 W RMS Class-D Digipro G4 |
| Dimensions (W x H x D) | 379 x 787 x 495 mm (14.92 x 30.98 x 19.48 in) |
| Weight | 31.8 kg (70.1 lbs) |









