Da-Lite Smart Low Voltage Wall Switch Series

The wall switch for Da-Lite's Smart motor: three buttons - up, stop, down - that drive the screen and park it wherever you let go. What separates it from the older low-voltage switch is the back of the plate. It carries an RJ45 port, so the run from the switch to the screen is a length of Cat 5e or Cat 6 terminated at both ends rather than bell wire pulled to a terminal block.

Wire it straight to the screen, or through a Da-Lite Screen Controller if the room needs a second switch position - one switch per screen direct, two when the Screen Controller is in the path. It is the additional or replacement switch for screens using the Smart motor shipped on or after 11 December 2023; older Da-Lite motors take the standard low voltage wall switch instead. Da-Lite part number DL16622.