Countryman B2D Directional Lavalier Microphone
Directional lavaliers have always meant accepting a much larger capsule, and the B2D is the exception: the next smallest directional lav on the market is more than twice its size. That gets a tight hypercardioid pattern into places an omni normally has to cover, such as mounted in the frame of a pair of glasses or set behind a shirt button, and it is the reason it works at a lectern parked directly under the main house wash where an omni would ring.
The practical gain is 6 to 10 dB of headroom over an omnidirectional lavalier, which shows up as fewer problems with feedback, room rumble, ambient noise, and phase cancellation when several mics are open at once. It ships with a single isolation clip that damps clothing and vibration noise while letting the capsule rotate a full 360 degrees for aiming, and the aramid-reinforced cable is built for repeated calls. Three sensitivities cover chest-worn work (W4), close placement such as eyeglass mounting (W5), and the highest overload level (W6), in five colors, with either a fixed connector or a threaded termination for a separate B2D Detachable Connector.
| Type | Directional miniature condenser lavalier |
|---|---|
| Polar Pattern | Hypercardioid |
| Frequency Response | 50 Hz to 18 kHz |
| Sensitivity | W4 (gray band): 6.0 mV/Pa (-44 dB re 1V/Pa); W5 (red band): 2.0 mV/Pa (-54 dB re 1V/Pa); W6 (blue band): 0.7 mV/Pa (-63 dB re 1V/Pa) |
| Equivalent Acoustic Noise | W4: 34 dBA; W5: 39 dBA; W6: 44 dBA |
| Overload Sound Level | W4: 120 dB SPL; W5: 130 dB SPL; W6: 140 dB SPL |
| Powering | 1 to 2 V, 500 uA operating current; +3 V / 2.7 kOhm, +5 V / 6.8 kOhm, +9 V / 15 kOhm |
| Weight | 0.22 oz (6.2 g) without connector; 0.52 oz (14.8 g) with TA4F connector |
| Cable | Aramid-reinforced, 5 ft; fixed or detachable termination |
| Included | Lavalier, single isolation clip, protective cap, windscreen, carrying case |




