Crestron logo
Shop All Crestron

Crestron PC-300 Energy Monitoring Power Conditioner and Controller 300

The PC-300 is the per-outlet version of Crestron's rack power conditioner. Where the PC-200 groups its eight rear outlets into four banks, the PC-300 switches, delays and meters each of the eight individually, so real power consumption can be attributed to one device rather than to a pair, and one device can be rebooted without disturbing its neighbour. A ninth unswitched outlet sits on the front, and a 2 in 220 x 176 colour TFT LCD with a five-way nav pad, HOME and BACK buttons handles configuration and status at the rack.

Protection matches the PC-200: UL 1449 Type 3 Listed surge suppression at 2000 J per mode, EMI and RFI filtering, a resettable thermal breaker, adjustable over and under voltage cutoff, and wiring fault detection. Front panel LEDs report power, fault, protection status and shutdown cause. An included external temperature sensor watches the enclosure with an adjustable over temperature cutoff, and ping monitoring reboots an outlet after four failed pings. Setup is browser based, with control system integration over Ethernet or Cresnet, plus myCrestron, Crestron Fusion and SNMP. The chassis is steel with an extruded aluminium front panel, 1RU with rack ears included.

Maximum Output Current15 A at 120 VAC total
Filtration40 dB at 100 kHz, 50 dB at 300 kHz with 50 ohm load
Surge ProtectionL-G, L-N, N-G modes; 2000 J per mode; 370 V clamping voltage, 1 ns clamping time; UL 1449 Type 3 Listed
Voltage CutoffUnder voltage adjustable 90 to 110 V; over voltage adjustable 130 to 147 V
SensingVoltage 90 to 160 V rms +/-1%, current 0.4 to 15 A rms +/-1%, both measured at input
Temperature Sensing13 to 221 F (-25 to 105 C); external sensor included, adhesive or magnetic mount, 9.8 ft lead
Communications100 Mbps Ethernet with SNMP, SSL, TLS, web server and SMTP client; Cresnet secondary port
Switched Outlets(8) NEMA 5-15R, individually switched locally or remotely with adjustable turn-on delay per outlet
Turn-On Delay0.1 to 10 seconds, adjustable per rear outlet
Display(1) 2 in (52 mm) diagonal, 220 x 176 pixel 16-bit TFT active matrix colour LCD with 5-way nav pad
ConstructionSteel chassis, extruded aluminium front panel, black finish; 1RU 19 in rack mountable, rack ears included
Dimensions1.73 in H x 17.32 in W (19.00 in with ears) x 10.56 in D; 8.2 lb (3.8 kg)
Weight8.2 lb (3.8 kg)