Crestron logo
Shop All Crestron

Crestron ADPT-USB-ENET USB-to-Ethernet Adapter

The ADPT-USB-ENET gives a Crestron Flex system a direct connection between a UC-ENGINE or UC-ENGINE-SD and the room's Crestron control interface. Because the link is point to point rather than routed through the building network, the room comes up without waiting on switch ports, VLANs, or security approvals, and it stays up regardless of what happens to the rest of the network.

Installation is a plug and a patch cable: the USB end goes into a USB port on the UC-ENGINE, the RJ-45 end takes a CAT5 or better run to the LAN port on the control interface (cable sold separately). Three diagnostic LEDs report power, link, and data activity, so a tech can confirm the connection at the rack without a laptop.

FunctionDirect Ethernet connection between a UC-ENGINE or UC-ENGINE-SD and a Crestron Flex control interface
Data Transfer SpeedUp to 100 Mbps
Host ConnectionUSB
Network ConnectionRJ-45, CAT5 or better (cable sold separately)
IndicatorsDiagnostic LEDs for connection and data transfer status
SetupPlug and play, no configuration required
Dimensions0.6 in. H x 1.0 in. W x 2.2 in. D (15 x 25 x 56 mm) plus 6 in. (152 mm) cord