Cisco logo
Shop All Cisco

Cisco Headset 521 and 522 Wired Headset with USB Controller

The Cisco Headset 520 Series is a wired headset for desk work and softphone calls. The 521 puts one ear cup on a single headband and leaves the other ear open; the 522 covers both ears. Both end in a 3.5 mm plug that goes into an in-line controller, and the controller ends in USB-A or USB-C depending on the part number you choose.

The controller carries answer, end, reject, hold and resume, mute and volume keys, so calls are handled without reaching for the keyboard. The boom holds a unidirectional electret microphone, and the earpieces cover 50 Hz to 18 kHz. The full cord from headset to USB plug is about 105 in (267 cm). Cisco covers every headset model with a two-year limited hardware warranty.

  • Connection3.5 mm connector with an in-line USB-A or USB-C controller
  • Weight521: 68.6 g; 522: 104.0 g
  • Wearing style521: single ear; 522: dual ear
  • Earpiece bandwidth50 Hz - 18 kHz
  • MicrophoneElectret condenser (ECM), unidirectional, 150 - 6800 Hz
Part NumbersCP-HS-W-521-USB= (521, USB-A), CP-HS-W-521-USBC (521, USB-C), CP-HS-W-522-USB= (522, USB-A), CP-HS-W-522-USBC (522, USB-C)
Wearing Style521: single ear; 522: dual ear
Connection3.5 mm connector with an in-line USB-A or USB-C controller
Earpiece Bandwidth50 Hz - 18 kHz
MicrophoneElectret condenser (ECM), unidirectional, 150 - 6800 Hz
Controller KeysAnswer, end, reject, hold/resume, mute/unmute, volume up, volume down
Cable LengthHeadset to USB about 105 in (267 cm); headset cord to 3.5 mm plug about 45 in (114 cm); controller cord to USB about 57 in (145 cm)
Weight521: 68.6 g; 522: 104.0 g
WarrantyTwo-year limited hardware warranty