Cisco IP Phone 8851/8861 Key Expansion Module, 28 Keys
This key expansion module adds line, speed-dial and busy-lamp keys to a Cisco IP Phone 8851, 8851NR or 8861, which suits receptionists and assistants who watch many extensions. It has 14 physical keys and two page buttons, giving 28 keys in all, beside a 3.5-inch colour display that tilts to match the phone.
The module has no power supply of its own and draws from the phone it is attached to. An 8861 takes up to three modules and an 8851 up to two, and more modules mean more power: an 8861 with one KEM needs 802.3at PoE or a Cisco Power Cube 4. A foot stand and the hardware to join the module to the phone come in the box.
- Dimensions9.015 x 4.45 x 1.58 in
- PowerDrawn from the phone; 48 VDC, 117 mA maximum
- Weight1 lb
- Compatible phonesCisco IP Phone 8851, 8851NR and 8861
- Keys14 physical keys, two pages, 28 keys total
| Part number | CP-8800-A-KEM= |
|---|---|
| Keys | 14 physical keys, two pages, 28 keys total |
| Display | 3.5-inch colour TFT, 320 x 480, 16-bit colour, backlit, articulating |
| Compatible phones | Cisco IP Phone 8851, 8851NR and 8861 |
| Modules per phone | Up to 3 on the 8861; up to 2 on the 8851 or 8851NR |
| Power | Drawn from the phone; 48 VDC, 117 mA maximum |
| Firmware | Cisco IP Phone 8800 firmware 12.0.1.11 or later |
| Dimensions | 9.015 x 4.45 x 1.58 in (229 x 113 x 40 mm) |
| Weight | 1 lb (448 g) |
| Included | Foot stand and side-by-side mounting hardware |









