Bose UPTB50 Surface-Mount Pan-and-Tilt Bracket
The UPTB50 is a surface-mount bracket that adjusts both pitch and yaw. Its loudspeaker plate bolts to the four M8 threaded inserts on the back of a DesignMax DM12SE or a ShowTime SK10 or SK12, and the bracket can be mounted with the speaker running horizontally or vertically.
The wall plate takes four M8 or 5/16-inch screws, at least two of them into a support structure. Loosen the top bolt to pan, and move the carriage bolt to set the tilt; on a vertical DM12SE the tilt runs 0 to 30 degrees. The bracket is rated for indoor or outdoor use, it can be painted, and all of the included hardware is stainless steel. Black is A02221-0100 and white is A02221-0200.
- Net Weight1.54 kg (3.4 lbs)
- Compatible WithDesignMax DM12SE
- TypeSurface-mount pan-and-tilt bracket
- Tilt Angle Limits (0 deg Pan)0 - 30 deg (DM12SE)
- Wall Fasteners4 screws, M8 or 5/16-inch
| Type | Surface-mount pan-and-tilt bracket |
|---|---|
| Compatible With | DesignMax DM12SE, ShowTime SK10 and SK12 (4 M8 threaded inserts on the rear panel) |
| Adjustment | Pitch and yaw; mounts horizontally or vertically |
| Tilt Angle Limits (0 deg Pan) | 0 - 30 deg (DM12SE) |
| Wall Fasteners | 4 screws, M8 or 5/16-inch |
| Included Hardware | Stainless-steel M8 screws for the loudspeaker plate |
| Application | Indoor or outdoor use; paintable |
| Net Weight | 1.54 kg (3.4 lbs) |
| Colors | Black, white |
| Product Codes | A02221-0100 (Black), A02221-0200 (White) |

- (1) UPTB50 Surface-Mount Pan-and-Tilt Bracket
- (1) installation guide









