Black Box LPS500 Series Gigabit Ethernet PoE Media Converter - 10/100/1000-Mbps Copper to Multimode Fiber, 850nm, 550m
The Black Box LPS500A-MM-SC is an LPS500 Series Gigabit PoE media converter that joins a 10/100/1000 Mbps copper segment to 1000 Mbps multimode fiber (850 nm, 550 m) and powers an 802.3af device at the end of the copper run with 48 VDC. It extends Ethernet well past the 100 m copper limit to cameras and access points far from an outlet.
Power management covers overcurrent protection, undercurrent detection, minimum load sensing and PSE power enable/disable, and LEDs show when PoE is being fed or interrupted. Link fault passthrough watches both ports and drops the other side's transmit on a loss of signal, and far-end fault detection stops the link partner sending into a dead link. The copper port autonegotiates with Auto MDI-X.
| Model | LPS500A-MM-SC |
|---|---|
| Type | Gigabit PSE media converter |
| Copper | 10/100/1000 Mbps, Auto MDI-X |
| Fiber | 1000 Mbps multimode, 850 nm |
| Distance | 550 m |
| PoE | 802.3af, 48 VDC |
| Fault Handling | Link fault passthrough, far-end fault |
| Flow Control | 802.3x full duplex; backpressure half duplex |
