Black Box Async RS232 to RS485 Interface Converter - DB9 to RJ11
The Black Box IC623A-F converts async RS-232 to RS-485 with a DB9 female RS-232 connector and an RJ-11 RS-485 connector. It carries data at up to 115.2 kbps and reaches 4,000 feet over CATx, point to point or multipoint with up to 32 RS-485 devices on one network.
It runs 2-wire half-duplex or 4-wire half- or full-duplex, on async data leads only. The RS-485 driver enables automatically on each spacing state from the RS-232 side. Two internal four-position DIP switches set it up, including impedance and echo tuning, and silicon avalanche diodes protect against transient surges.
| Model | IC623A-F |
|---|---|
| Type | Async RS-232 to RS-485 converter |
| Connectors | DB9 female to RJ-11 |
| Data Rate | Up to 115.2 kbps |
| Distance | Up to 4,000 ft |
| Operation | 2-wire half-duplex or 4-wire half/full-duplex |
| Multidrop | Up to 32 RS-485 devices |
| Protection | Silicon avalanche diode surge protection |
