Black Box logo
Shop All Black Box

Black Box Async RS232 to RS485 Interface Converter - DB25 to Terminal Block

The Black Box IC1520A-F converts async RS-232 to 2-wire RS-485 in both directions, with a DB25 female connector on the RS-232 side and a terminal block with strain relief on the RS-485 side. It moves data at up to 115.2 kbps and reaches up to 4,000 feet (1,219.2 m).

The DB25 is configured as DCE and needs no setup or RTS toggle. The converter powers itself from RS-232 data and control signals, so no batteries or AC adapter are needed. It runs half-duplex over 2 wires, passes async data leads only, and supports point-to-point or multipoint links with up to 32 RS-485 devices on one multidrop network. Once installed it works transparently, like a straight cable.

ModelIC1520A-F
TypeAsync RS-232 to RS-485 converter
ConnectorsDB25 female to terminal block
Data RateUp to 115.2 kbps
DistanceUp to 4,000 ft (1,219.2 m)
Operation2-wire half-duplex, async only
MultidropUp to 32 RS-485 devices
PowerFrom RS-232 signals