Barcus 4000-BRB-U 4000 Piano & Harp Planar Wave System
The Barcus Berry 4000 Planar Wave System is a piano and harp pickup that takes the place of a spread of microphones and a multi-channel mixer. A single piezo crystal sensor attaches to either side of the soundboard with adhesive patches, with no drilling and no tools, and picks up the full range of the instrument with even balance from bass to treble. Because it reads the soundboard rather than the air, it rejects stage feedback and ignores room sound, keyboard clatter and pedal noise.
The sensor feeds the 4000XL active preamp and direct box, which runs on the included 9V battery or on phantom power. It sends a balanced XLR main out to the house desk, with a ground lift and a 0/-12dB output pad, plus a 1/4-inch monitor output with its own level control for a stage amp. Barcus Berry lists it for piano, harp, harpsichord, clavichord and cimbalom.
- Main OutputBalanced XLR with ground lift
- Output Pad0dB / -12dB switch
- Monitor Output1/4in, variable level
- Power9V DC battery (included) or phantom power
- Preamp4000XL active piezo preamp / direct box
| Sensor | Planar Wave piezo crystal for piano/harp |
|---|---|
| Preamp | 4000XL active piezo preamp / direct box |
| Main Output | Balanced with ground lift |
| Output Pad | 0dB / -12dB switch |
| Monitor Output | 1/4in, variable level |
| Power | 9V DC battery (included) or |
| Mounting | Either side of the soundboard, no tools or drilling |
| Ideal For | Piano, harp, harpsichord, clavichord, cimbalom |
| Included | Piezo crystal sensor, 4000XL preamp, adhesive patches, four rubber feet, instruction guide |









