Shop All Avid
Avid Pro Tools | Sync X Synchronizer
Pro Tools | Sync X is a synchronizer for Pro Tools | HDX and HD Native systems. Connected through the DigiSerial port, it locks audio sample position to video frame edge with near sample-accurate accuracy, which is what dubbing, ADR, Foley and multi-operator mix stages need. Its long-term jitter is 72 ps and its clock accuracy is 1 ppm.
It accepts and generates video reference with automatic format detection, with four reference outputs from the built-in generator, and handles Word Clock, Loop Sync, AES3, LTC, Bi-Phase/Tach and pilot. All settings, including pull-up and pull-down rates, are set from Pro Tools Ultimate, and a 9-pin port lets Pro Tools control a video deck.
- Other I/OAES3 (DB25), Loop Sync in/out (BNC)
- Host ConnectionDigiSerial port (Mini DIN 8-pin)
- Sample Rates44.1, 48, 88.2, 96, 176.4 and 192 kHz
- Video Reference1 BNC input, 2 BNC outputs; generator with 4 BNC outputs
- Word Clock1 BNC input, 6 BNC outputs
| Sample Rates | 44.1, 48, 88.2, 96, 176.4 and 192 kHz |
|---|---|
| Video Reference | 1 BNC input, 2 BNC outputs; generator with 4 BNC outputs |
| Word Clock | 1 BNC input, 6 BNC outputs |
| Timecode | LTC: 1 female input, 1 XLR male output |
| Other I/O | AES3 (DB25), Loop Sync in/out (BNC), GPIO/Bi-Phase/Tach/Pilot (DB25), MIDI out (DB9), 10 MHz/AES3id input |
| Jitter | 72 ps average long-term |
| Clock Accuracy | 1 ppm |
| Host Connection | DigiSerial port (Mini DIN 8-pin) |
| Form Factor | 1U rack mount |
XLRThe three-pin balanced audio connector used on professional microphones and mixers.
- Pro Tools | Sync X interface
- Power cable
- Serial cable
- BNC cables (2)
- MIDI breakout cable
- Rackmount screws and desktop feet
- Registration card
- Documentation
