Auralex Snap-On Anchor Hex Driver and Marking Plug

The Snap-On Anchor is how a 2 in ProPanel mounts flush to a wall, onto an angled wall, or overhead, and these are the two tools the system runs on. The hex driver seats the anchor body into the panel; the marking plug drops into a seated anchor and transfers its exact position to the wall so the wall-side ratchet plug lands where the panel expects it. Both ship inside the SO_ANCHOR_KIT and the 50-point SO_ANCHOR_50 kit, so buy them here when a job needs a second driver or replacement plugs.

Use four anchors per panel. Snap-On Anchors are specified for 2 in ProPanels only, and are not rated for panels larger than 16 sq ft in area.