Alfatron ALF-MA15075D 150 W Mixer Amplifier with DSP and Dante
The ALF-MA15075D is a compact 1U Class-D mixing amplifier for meeting rooms and other quiet spaces; it has no fan. A mode switch sets it to two channels of 75 W into 4 or 8 ohms, or one bridged channel of 150 W on a 70 V or 100 V line. Inputs are two Dante channels, an optical input, a stereo balanced analog input and two balanced microphone inputs with rear gain controls.
Built-in processing covers volume, an adjustable high-pass filter (100 Hz default) and a 5-band graphic EQ at 40 Hz, 150 Hz, 500 Hz, 2 kHz and 10 kHz. A balanced line output passes the mix to another amplifier or system. Control is through a built-in web page and TCP/IP for third-party systems, plus a trigger port for external mute. It goes to standby after 5 to 30 minutes without signal, and low inrush current lets several units power up together.
- Dimensions (W x D x H)320 x 245 x 45 mm (1U)
- Frequency Response20 Hz - 20 kHz, +/-2 dB at 4 ohms
- Power Supply100-240 V AC, 50/60 Hz, 150 W max
- Amplifier TypeClass D, fanless
- Sampling Rate48 kHz / 24-bit
| Part Number | ALF-MA15075D |
|---|---|
| Model | ALF-MA15075D |
| Inputs | 2 x Dante, 1 x optical, stereo balanced analog, 2 x balanced microphone |
| Outputs | 1 x balanced line, stereo low-impedance amp out, 1 x 70 V/100 V amp out |
| Power Output | 2 x 75 W at 4/8 ohms; 1 x 150 W at 70 V or 100 V (bridged) |
| Amplifier Type | Class D, fanless |
| Sampling Rate | 48 kHz / 24-bit |
| Processing | Volume, adjustable HPF (100 Hz default), 5-band EQ (40 Hz, 150 Hz, 500 Hz, 2 kHz, 10 kHz), +/-10 dB |
| Frequency Response | 20 Hz - 20 kHz, +/-2 dB at 4 ohms |
| THD+N | <0.1% at 1 kHz, 3 dB below clipping |
| SNR | >90 dBA |
| Control | Web GUI, TCP/IP, trigger port for mute |
| Standby | After 5-30 minutes without signal (adjustable) |
| Power Supply | 100-240 V AC, 50/60 Hz, 150 W max |
| Operating Temperature | 0 to 50 C |
| Dimensions (W x D x H) | 320 x 245 x 45 mm (1U) |
| UPC | 658325231236 |
| Brand | Alfatron |









