Alfatron ALF-IPK1HD 4K AV over IP Decoder
The ALF-IPK1HD receives streams from ALF-IPK1HE encoders on a gigabit network and outputs them to HDMI at up to 4K30. It decodes H.265 and H.264, and its built-in scaler keeps switching between sources fast and clean. No IP addressing is needed: decoders and encoders find each other on the switch, and the VDirector iOS app builds a video matrix or video wall from them.
Stereo audio comes out on HDMI and on a line output, and the RS-232 route follows the selected video source. Power comes from PoE or a 12 V supply. For PoE startup Alfatron says to connect the network cable before the HDMI cable, use gigabit switches and shielded cable, and avoid TP-Link switches.
- Dimensions (W x H x D)175 x 25 x 100.2 mm (6.9 x 0.98 x 3.9 in)
- Input1 x LAN (PoE)
- ResolutionUp to 4K @ 30 Hz
- Audio FormatMPEG4-AAC and LPCM stereo
- Power12 VDC 1 A or PoE
| Part Number | ALF-IPK1HD |
|---|---|
| Model | ALF-IPK1HD |
| UPC | 658325231076 |
| Input | 1 x LAN () |
| Output | 1 x (HDMI 1.4, HDCP 2.2), 1 x line out, 1 x RS-232 |
| Resolution | Up to 4K @ 30 Hz |
| Video Codec | H.265 / H.264 |
| Audio Format | MPEG4-AAC and LPCM stereo |
| Network | Gigabit switch required; shielded Cat cable recommended |
| Power | 12 VDC 1 A or PoE |
| Power Consumption | 6 W max |
| Operating Temperature | 0 to 45 C (32 to 113 F) |
| Dimensions (W x H x D) | 175 x 25 x 100.2 mm (6.9 x 0.98 x 3.9 in) |
| Weight | 0.60 kg (1.32 lb) |
| Brand | Alfatron |









