Shop All Alfatron
Alfatron ALF-BM10-W Half-Spherical Condenser Boundary Microphone (White)
The ALF-BM10 is a small boundary microphone with a half-spherical pickup pattern, built to sit flush in a table, ceiling or instrument panel for speech pickup in meeting spaces. This page is the white version.
It is an electret condenser capsule with 12.8 mV/Pa sensitivity, 68 dB(A) signal-to-noise ratio, 26 dB(A) self-noise and 117 dB maximum SPL. Output is 200 ohms on a 3-pin XLR, and it runs on 9 to 52 V phantom power at 3 mA.
- Connector3-pin XLR
- Polar PatternHalf-spherical
- Frequency Response50 Hz - 20 kHz
- Sensitivity12.8 mV/Pa (-38 dBV) at 1 kHz
- Phantom Power9-52 V, 3.0 mA
| Part Number | ALF-BM10-W |
|---|---|
| Model | ALF-BM10-W |
| Transducer | Electret |
| Polar Pattern | Half-spherical |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 12.8 mV/Pa (-38 dBV) at 1 kHz |
| Nominal Impedance | 200 ohms |
| Load Impedance | 2 kohms or more |
| Signal-to-Noise Ratio | 68 dB(A) |
| Max SPL | 117 dB (1% THD) |
| Equivalent Noise | 26 dB(A) |
| 9-52 V, 3.0 mA | |
| Connector | 3-pin |
| Mounting | Ceiling or desktop |
| Color | White |
| UPC | 658325230802 |
| Brand | Alfatron |
CondenserA microphone type with a powered capsule. Usually more sensitive and detailed than a dynamic.
Phantom powerPower for condenser microphones, usually 48 V, sent down the microphone cable from the mixer or interface.
XLRThe three-pin balanced audio connector used on professional microphones and mixers.









