Shop All Adder
Adder 1GbE PoE Splitter 12W, IEEE 802.3af, 5V 2.4A Output
The Adder 1GbE Power over Ethernet Splitter 12W supplies power and 1GbE data at the same time to devices that do not support PoE. Its 5V 2.4A (12W) output uses a 3.5 mm barrel connector.
It complies with IEEE 802.3af, with a 1500V isolation PoE transformer and a network filter. It accepts 44V to 57V, auto-detects the PSE power source and protects connected equipment from short circuit, over voltage, overcurrent and overheating. Adder rates its efficiency at 83%.
- Size (W x H x D)28 x 24 x 81 mm / 1.1 x 0.9 x 3.2 in
- PoE inputPoE (802.3af), 44V to 57V
- Power output5V 2.4A (12W), 3.5 mm barrel connector
- Network port1x 8p8c (RJ45), 10/100/1000MbE
- CableCAT5e and above, up to 100 m / 328 ft
| Part number | PSU--5VDC-2.4A |
|---|---|
| Ordering code | PSU-POE-5VDC-2.4A |
| PoE input | PoE (802.3af), 44V to 57V |
| Power output | 5V 2.4A (12W), 3.5 mm barrel connector |
| Network port | 1x 8p8c (RJ45), 10/100/1000MbE |
| Cable | CAT5e and above, up to 100 m / 328 ft |
| Operating temperature | -20 to 50 °C / -4 to 122 °F |
| Operating humidity | 10% - 90% (non-condensing) |
| Size (W x H x D) | 28 x 24 x 81 mm / 1.1 x 0.9 x 3.2 in |
| Flying lead length | 190 mm |
| Efficiency | 83% |
PoEPower over Ethernet. Power and data on one network cable.

- 1x 1GbE Power over Ethernet Splitter 12W








