Anton Bauer Battery Bracket for Canon C200, C200B and C300 Mark II

A battery plate built for the Canon C200, C200B and C300 Mark II, carrying the LEMO-compatible connector those bodies expect. Two P-Tap ports on the plate feed accessories at battery voltage, so a monitor and a receiver come off the same pack as the camera.

The 12 inch cable exits the right side of the plate, which is the side that lets it loop into the camera without crossing the operator's hand. The Pro versions swap the body for rugged aluminium and add a third P-Tap, a digital fuse with a reset button, a rear cover plate and captive mounting screws, so an accessory overload trips a resettable fuse rather than taking the camera down with it.