Sennheiser MKH30-P48 Microphone

Sennheiser MKH30-P48 G&G Price: $1,400 Bi-directional(figure 8) condenser in Matte Black finish with switchable -10dB pad and switchable bass attenuation (-4 dB @ 50 kHz), supplied with MZQ31, MZS80 and MZW41 (24.0 oz) 1 MKH 30 1 MZS 80 shock mount 1 MZW 41 windshield List Price: $2,438

Power Supplies for MKH Series:
MZA14-P48U	Battery power supply, powers one 48 volt phantom powered microphone. Battrey life approximately 20 hours using a 9 volt alkaline battery. Battery test, attenuation(0, -10, -20 dB) and low frequency rolloff(20, 80, 140 Hz) controls (19.0 oz)	$425
MZA14-TU	Battery power supply, powers one 12 volt AB (T-powered) microphone. Battrey life approximately 30 hours using a 9 volt alkaline battery. Battery test, attenuation(0, -10, -20 dB) and low frequency rolloff(20, 80, 140 Hz) controls (19.0 oz)	$425
12T-P48	Phantom 48 volt to 12 volt AB (T-power) adapter	$85
Shockmounts and Pistol Grips for MKH Series:
MZS415-3	Shock mount for 19mm (~3/4 in) diameter microphones(MKH416, MKH418S), requires MZG415-3 swivel mount for most applications (5.0 oz)	$120
MZS20-1	Combination shock mount, pistol grip and stand adapter for MKH20 - 80, MKH416 and K6 Series, required for mounting in blimp windscreens (15.5 oz)	$310
MZS20-1/216	MZS20-1 kit with MZA216 thread adapter, 3/8 - 5/8 in (18.5 oz)	$320
MZS40	Elastic suspension shok mount for MKH20, MKH40 and MKH50 (20.0 oz)	$200
MZS80	Shock mount for MKH80 and MKH30 (26.0 oz)	$205
MZSCAM	Elastic suspension shockmount with hot shoe mount for camera use (4.0 oz)	$50
Windscreens/Wind Muffs for MKH Series:
MZW20-1	Blimp windscreen for ME62 and ME64 capsules, MKH20, MKH30, MKH40 and MKH50, requires MZS20-1 (12.5 oz)	$270
MZH20-1	Long hair muff for use with MZW20-1 (13 oz)	$195
MZW41	Gray foam windscreen for MKH20, MKH30, MKH40 and MKH50 (5.0 oz)	$10
MZW60-1	Blimp windscreen for MKH60, MKH416, K6 and ME66 requires MZS20-1 (14.5 oz)	$290
MZH60-1	Long hair muff for use with MZW20-1 blimp windscreen on ME66 capsule and MZW60-1 blimp windscreen for MKH series (14 oz)	$190
MZW61	Black foam windscreen for MKH60 (2.0 oz)	$100
MZW70-1	Blimp windscreen for ME67 capsule and MKH70, requires MZS20-1 pistol grip (16.5 oz)	$325
MZH70-1	Long hair muff for use with MZW20-1 blimp windscreen on ME67 capsule and MZW70-1 blimp windscreen for MKH series (16 oz)	$200
MZW71	Black foam windscreen for MKH70 (3.5 oz)	$155
MZW80	Black foam windscreen for MKH800 (2.0 oz)	$65
MZW415	Gray foam windscreen for MKH416 (2.0 oz)	$70
Adapters and Clips for MKH Series:
MZC1	Shotgun ceiling mount accessory for MKH series and K6 series shotguns	$40
Auditorium Hanger for MKH Series:
MZA216	Thread adapter, metric male to 5/8 in female (2.0 oz)	$5.25
MZA217	Brass thread adapter, 5/8 in external to 3/8 in internal (1.0 oz)	$5.25
MZD30	Piggyback microphone holder for any combonation of two MKH20, MKH30, MKH40 or MKH50 (1.0 oz)	$95
MZG415-3	Swivel mount yoke for MZS shock mounts (6.0 oz)	$80
MZQ40	Flexible quick release stand adapter for MKH20, MKH40, MKH50 and MKH60 (6.0 oz)	$55
MZQ100	Quick release microphone clip, fits e609 Silver, e614, e906, MHK416, MZH3015, MZH304 and MZH3042 goosenecks, 3/8 in and 5/8 in threads (2.0 oz)	$45
Cables for MKH Series:
ACS5	5 pin XLR to dual 3 pin XLR adapter, 6 in length for MKH418S	$80
AC418	5 pin XLR to dual 3 pin XLR cable, 3.2 ft for MKH418S	$100
Cases for MKH Series:
CASESHORTMKH	Foam-lined hardshell polymer case for MKH20/30/40/50	$45
CASELONGMKH	Foam-lined hardshell polymer case for MKH416	$45
CASEMKH70	Wood case for MKH70	$90

Description:

The symmetrical transducer design of the MKH 30 produces an unusually wide and smooth frequency response. It is particularly suited to soloists and small instrumental groups and can also serve as an 'S' microphone in MS stereo applications. As a support microphone it is particularly useful in the effective suppression of sounds from adjacent sound sources.

Features:

High rejection of lateral sounds Exceptionally low inherent self-noise Symmetrical transducer technology ensures extremely low distortion Transformerless and fully floating balanced output Switchable roll-off filter to compensate for proximity effects at a distance of approx. 0.5 m Switchable pre-attenuation Black, anodised light metal body

Specifications:

Pick-up pattern: figure-of-eight Sensitivity in free field, no load (1kHz): 25 (8) mV/Pa +- 1 dB Nominal impedance: 150 Ohm Min. terminating impedance: 1000 Ohm Equivalent noise level: 13 (19) dB Equivalent noise level weighted as per CCIR 468-3: 22 (28) dB Power supply: Phantom 48 +- 4 V Current consumption: 2 mA Dimensions: d 25 x 174 Weight: ca. 110 g