|
Specifications: |
MICROPHONE INPUT
- Connector: Female XLR Pin 2 Hot
- Type: Electronically balanced/unbalanced
- Impedance: 330O
- Max Input Level: -9 dBu or +11 dBu with 20 dB pad engaged
- CMRR: >40dB, Typically 55dB
- Equivalent Input Noise: Typically 120 dBu with a 150O, source load 20 Hz to 20kHz Bu
LINE INPUT (REAR PANEL)
- Connectors: TRS 1/4" Jack
- Type: Electronically balanced/unbalanced
- Impedance: 20kO unbalanced, 40kO balanced
- Maximum Input Level: +21dBu balanced or unbalanced
- CMRR: >40dB, Typically 55dB
- Gain (Drive Control): -15dB to +15dB
INSTRUMENT INPUT (FRONT PANEL)
- Connector: TS 1/4" Jack
- Type: Unbalanced
- Impedance: 470kO
- Maximum Output Level: >+21 dBu unbalanced
- Insert Connector: TRS 1/4"
- Type: Unbalanced
- Impedance: 100O, send -20O return
ANALOG OUTPUTS
- Connector: Male XLR Pin 2 Hot and TRS 1/4"
- Type: Servo-balanced/unbalanced
- Impedance: Balanced 120O, unbalanced 60O
- Maximum Output Level: >+21 dBu, >+20 dBm (into a 600O load)
DIGITAL OUTPUTS
- Connector:
XLR for AES/EBU
RCA for S/PDIF
- Impedance:
110O for AES/EBU
75O for S/PDIF
WORD SYNC INPUT/OUTPUT
- Connectors: BNC
- Input Impedance: 75O terminated by internal jumper
- Input: 96, 88.2, 48, or 44.1kHz word clock
- Output: 96, 88.2, 48, or 44.1kHz word clock
SYSTEM PERFORMANCE
- DRIVE Control Range:
+30dB to +60dB for Mic Input
-15dB to +15dB for Line and Instrument Inputs
- LEVEL Control Range Analog and Digital): -15dB to +15dB
- LINE: Selects between microphone and line inputs
- Phantom Power: +48V
- PAD: 20dB pad
- PHASE: Reverses pins 2 and 3 of the microphone input XLR
- LOW CUT: 75Hz, 12dB/octave high pass filter
- Frequency Response: <10Hz to 75kHz
- THD + Noise: 0.35% typical at +4dBu out, 1kHz, 40 dB gain
- Interchannel Crosstalk: Typically –80dB, 20Hz to 20kHz
ANALOG TO DIGITAL CONVERSION
- Type: dbx® Type IV™ A/D Conversion System
- Sample Rate: 96, 88.2, 48, or 44.1kHz selectable
- Wordlength: 24, 20, or 16 bit selectable
- Dither Type: TPDF, SNR2, or none
- Noise Shape: Shape 1, Shape 2, or none
- Output Format: S/PDIF or AES/EBU
- Convertor Dynamic Range: 107dB typical, A-weighted, 22kHz bandwidth
POWER SUPPLY
- Operating Voltage:
DO: 120VAC 60Hz, 100VAC 50/60Hz
EU: 230VAC 50/60 Hz
- Power consumption: 35W
PHYSICAL
- Dimensions: 1.75'' x 7.75'' x 19'' (4.5cm x 19.7cm x 48.5cm)
- Power consumption: 6.89 lbs (3.17kg)
|
|