|
Specifications: |
INPUTS
- Connectors: Female XLR Pin 2 hot, pin 1 lift switch
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced > 20 k ohm, unbalanced > 10 k ohm
- Maximum Input Level: >+30dBu balanced, > +26dBu unbalanced
- CMRR: >100dB 20 Hz to 200 Hz, >80dB 200 Hz to 2 kHz, >60dB 2 kHz to 20 kHz
OUTPUTS
- Connectors: Male XLR Pin 2 hot
- Type: Transformer balanced/unbalanced, RF filtered.
- Impedance: Balanced 50ohm, unbalanced 25ohm
- Maximum Output Level: Bal >+30dBm (into 600 ohm). Unbalanced (with UNBAL switch engaged) >+24dBm (into 600 ohm).
SIDECHAIN SEND (OUTPUT)
- Connector: Male XLR Pin 2 hot
- Type: Unbuffered, hard-wired to INPUT, RF filtered
SIDECHAIN RETURN (INPUT)
- Connector: Female XLR Pin 2 hot
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced >20 k ohm, unbalanced >10k ohm
- Maximum Input Level: >+30dBu balanced or unbalanced
SYSTEM PERFORMANCE
- 0.1dB Bandwidth: 20 Hz to 20 kHz +0/-0.1dB, no gain reduction, unity gain
- 1.0dB Bandwidth: <4 Hz to >40 kHz +0/-1.0dB, no gain reduction, unity gain
- Frequency Response: <2 Hz to >200 kHz +0/-3.0dB, no gain reduction, unity gain
- Noise: <-92dBu, unweighted, 20 Hz to 20 kHz measurement bandwidth
- Dynamic Range: >122dB
- THD + Noise:
0.008% typical at +4dBu, 1kHz, unity gain
0.05% typical at +30dBu, 1kHz, unity gain
<0.1% any amount of compression up to 30dB, 1kHz
- IMD: <0.02% SMPTE 4:1, no gain reduction, unity gain
- Deviation From Linear Phase: <1.0 degree, <10 Hz to 200 kHz, 30dB of compression
- Interchannel Crosstalk: <-100dB, 20 Hz to 20 kHz
- VCA: dbx V8™
- VCA Dynamic Range: >127dB
- VCA THD + Noise: 0.006% typical at +4dBu, 1 kHz, unity gain
- Stereo Coupling: True RMS Power Summing™
COMPRESSOR
- Threshold Range: -40 to +30dBu
- Ratio: 1:1 to 4:1
- Threshold Characteristic: Selectable OverEasy® or hard knee
- Attack/Release Modes: Selectable Manual or Auto
- Manual Attack Time: Scalable program-dependent. Typically 400dB/msec to 1dB/msec
- Manual Release Time: Scalable program-dependent. Typically 4000dB/sec to 10dB/sec
- Auto Attack Time: Program-dependent, typically 15 ms for 10dB, 5 ms for 20dB, 3 ms for 30dB
- Auto Release Time: Program-dependent, typically 120dB/sec
- Output Gain: -20 to +20dB
LIMITER
- Threshold Range: +4dBu to >+30dBu (off)
- Ratio: 4:1
- Limiter Type: PeakStopPlus® two-stage limiter
- Stage 1: Instantaneous Transient Clamp
- Attack Time: Zero
- ReleaseTime: Zero
- Stage 2: Intelligent Predictive Limiting
- Attack Time: Program dependent, typically <5 msec.
- Release Time: Program dependent, typically 22dB/sec
PHYSICAL
- Dimensions: 3.5" H X 19" W X 11.25" D
- Weight: 20.5 lbs (9.3 kg)
- Shipping Weight: 25.0 lbs (11.3 kg)
|
|