Azden 100LTH
On-Camera UHF Wireless System

Azden 100LTH G&G Price: $480 Combo Lavalier and Handheld UHF Wireless System On-camera 100UPR Receiver 10HT handheld wireless mic 10BT Body pack transmitter EX-503 Lavalier Microphone List Price: $665

Optional Mics for 10BT Transmitter:
EX-503	Omni-directional Lavalier Microphone with mini-plug connector	$24
EX-505U	Uni-directional Lavalier Microphone with mini-plug connector	$45
ECM-44	Sony Omni Lavalier Microphone with mini-plug connector	$149
HS-9	Omni Headset Microphone with mini-plug connector	$38
HS-11	Uni-directional Headset Microphone with mini-plug connector	$70
HS-12	Uni-directional behind-the-headset microphone with mini-plug connector	$85
CM-20	Neck-worn gooseneck omni microphone with mini-plug connector	$85
CXM-5	K&K uni-directional sax microphone with mini-plug connector	$129
Accessories:
MX-1	Balanced mini-to-XLR cable for 100UPR & 111R	$20
RSB-1	Receiver shoe mount for 100UPR & 111R	$12

Description:

The 100LTH System consists of the 100UPR receiver, a 10HT handheld transmitter/mic and a 10BT bodypack transmitter with lavalier mic. The new 100UPR receiver features twin-antennas a 3.5mm -58dbB balanced mic level output jack a 3.5mm monitor output jack (with level control) a recessed On/Off switch a Power On/ Signal Received LED and channel selectors to set the desired frequency. Using crystal-control and PLL synthesis the 100UPR operates for better than 8 hours on a single 9V battery. The receiver comes with a "hot-shoe" mount, hook-and-loop mounting tape and a 3.5mm to 3.5mm output cable (Azden's MX-1 3.5mm - to - XLR cable is optional). Included is the new UHF handheld microphone - the 10HT, whicih is designed to work seamlessly with the on-camera 100UPR receiver. The new mic features Azden’s special surface coating to reduce handling noise. Using an electret-condenser unidirectional element, the 10HT is designed with low-noise PLL circuitry to allow the user to select any one of 63 UHF channels to assure interference free reception in the 794-806MHz range. The 10HT uses two commonly available alkaline “AA” batteries to operate for better than 8 hours. The 10HT is 230mm (9") long and 44mm (1.73") in diameter. Also included is the new 10BT body-pack transmitter, which is supplied with an Azden EX-503 omni-directional lapel microphone and a metal belt-clip. In addition to the 3.5mm mic input jack the transmitter has a Power On switch with an associated LED a separate Standby switch for audio muting and a set of channel selector switches. It also runs better than 8 hours on a single 9V battery.

Specifications:

100UPR Frequency Range: UHF 63-Channel Selectable (793.750-805.875MHz) Type of Reception: Antenna Diversity Oscillator: PLL Synthesized RF Squelch Level: 16dBµV Frequency Response: 50Hz -15kHz S/N Ratio: >70dB “A” Weighted Audio Distortion: <1% @ 1kHz Operating Temp: 0°C –50°C (32°F -122°F) MIC Out (Balanced): –58dBm @ 600 Ω Monitor Out: –10dBm (Max) @ 33 Ω MIC Out Connector: 3.5mm Balanced Mini-Jack Monitor Out Connector: 3.5mm Stereo Mini-lack Power Requirement: 1- 9V Alkaline Battery Battery Life: 6 - 8 Hours w/Alkaline Battery Dimensions: 62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches) Weight Approx.: 120g Including Battery (4.23oz) 10HT Frequency Range: UHF 63-Channel Selectable (793.750 – 805.875MHz) Oscillator: PLL Synthesized RF Power: 10mW Frequency Response: 50Hz – 12kHz Max. Deviation: ±75kHz @ 1kHz Modulation, MIC Input –11dBm S/N Ratio: >70dB “A” Weighted Audio Distortion: <1% @ 1kHz MIC Element: ECM MIC Sensitivity: ±5kHz @ -46dBm (0dBm+0.775V) Operating Temp.: 0°C – 50°C (32°F – 122°F) Power Requirement: 2 – 1.5V “AA” Alkaline Batteries – 8-10 Hours Dimensions: 230H x Ø 44D mm (9.05H x 1.73D inches) Weight: Approx. 130g Including Batteries (4.58oz) 10BT Frequency Range: UHF 63-Channel Selectable (793.750 – 805.875MHz) Oscillator: PLL Synthesized RF Power: 10mW Frequency Response: 50Hz – 15kHz Max. Deviation: ±75kHz @ 1kHz Modulation, MIC Input –11dBm S/N Ratio: >70dB “A” Weighted Audio Distortion: <1% @ 1kHz MIC Sensitivity: ±40kHz @ -22dBm MIC Input (0dBm+0.775V) - 3.5mm Mini Jack Operating Temp.: 0°C – 50°C (32°F – 122°F) Power Requirement: 1 – 9V Alkaline Battery - 6 – 8 Hour Dimensions: 62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches) Weight: Approx. 120g Including Battery (4.23oz)