|
Specifications: |
- ELEMENT: Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN: Half-cardioid (cardioid in hemisphere above mounting surface)
- FREQUENCY RESPONSE: 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
- OPEN CIRCUIT SENSITIVITY: –34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE: 200 ohms
- MAXIMUM INPUT SOUND LEVEL: 130 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical): 104 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 68 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 4 mA typical
- SWITCHES:
- Touch-sensitive control: on/off;
- Switch function: touch on/off, momentary on, momentary off; Flat, roll-off
- WEIGHT: 9.3 oz (264 g)
- DIMENSIONS: 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
- OUTPUT CONNECTOR: TB3M-type
- CABLE: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors
- OPTIONAL INTERCHANGEABLE ELEMENTS: UE-H hypercardioid (100°);
UE-O omnidirectional (360°)
- ACCESSORY FURNISHED: Soft protective pouch
|
|