|
Specifications: |
- ELEMENT: Fixed-charge back plate permanently polarized condenser
- POLAR PATTERN: Omnidirectional in hemisphere above mounting surface
- FREQUENCY RESPONSE: 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
- OPEN CIRCUIT SENSITIVITY:
Phantom: –39 dB (11.2 mV) re 1V at 1 Pa
Battery: –40 dB (10.0 mV) re 1V at 1 Pa
- IMPEDANCE:
Phantom: 200 ohms
Battery: 270 ohms
- MAXIMUM INPUT SOUND LEVEL:
Phantom: 132 dB, 1 kHz at 1% T.H.D.
Battery: 122 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical):
Phantom: 111 dB, 1 kHz at Max SPL
Battery: 101 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 73 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
- BATTERY TYPE: 1.5V AA/UM3
- BATTERY CURRENT/LIFE: 0.4 mA/1200 hours typical (alkaline)
- SWITCH: Off, on-flat, on-roll-off
- WEIGHT (MICROPHONE): 2.8 oz (78 g)
- WEIGHT (POWER MODULE): 4.9 oz (139 g)
- DIMENSIONS (MICROPHONE): 2.56" (65.0 mm) diameter, 0.59" (15.1 mm) height
- DIMENSIONS (POWER MODULE): 3.31" (84.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D
- OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
- CABLE: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
- ACCESSORIES FURNISHED: AT8531 power module; battery; soft protective pouch
|
|